Search results for "Polyethylene terephthalate"
showing 10 items of 37 documents
Chromogenic Detection of Nerve Agent Mimics by Mass Transport Control at the Surface of Bifunctionalized Silica Nanoparticles
2010
Chemical warfare (CW) agents are toxic chemicals that have been used in several terrorist attacks in recent years. Among CW species, nerve agents are probably the most dangerous; their high toxicity and facile synthesis underscores the need to detect these lethal compounds with quick, reliable procedures. Analytical methods based on enzymatic assays and physical measurements have generally been used to detect these hazards. However, these protocols usually have limitations such as low selectivity, poor portability, and a certain level of complexity. In recent years, several chromogenic and fluorogenic sensors, and reagents for the detection of nerve agents have been described. For instance,…
A statistical design of experiments for optimizing the MALDI-TOF-MS sample preparation of polymers. An application in the assessment of the thermo-me…
2011
[EN] The sample preparation procedure for MALDI-TOF MS of polymers is addressed in this study by the application of a statistical Design of Experiments (DoE). Industrial poly (ethylene terephthalate) (PET) was chosen as model polymer. Different experimental settings (levels) for matrixes, analyte/matrix proportions and concentrations of cationization agent were considered. The quality parameters used for the analysis were signal-to-noise ratio and resolution. A closer inspection of the statistical results provided the study not only with the best combination of factors for the MALDI sample preparation, but also with a better understanding of the influence of the different factors, individua…
Chemical compounds and toxicological assessments of drinking water stored in polyethylene terephthalate (PET) bottles: A source of controversy review…
2012
A declaration of conformity according to European regulation No. 10/2011 is required to ensure the safety of plastic materials in contact with foodstuffs. This regulation established a positive list of substances that are authorized for use in plastic materials. Some compounds are subject to restrictions and/or specifications according to their toxicological data. Despite this, the analysis of PET reveals some non-intentionally added substances (NIAS) produced by authorized initial reactants and additives. Genotoxic and estrogenic activities in PET-bottled water have been reported. Chemical mixtures in bottled water have been suggested as the source of these toxicological effects. Furthermo…
Long-term results of the use of silicone sheets after diskectomy in the temporomandibular joint: clinical, radiographic and histopathologic findings
1999
The aim of the present study was to evaluate the long-term results of a group of patients who had the disk of the temporomandibular joint (TMJ) removed and permanently replaced by a silicone sheet. The study group comprised 48 patients, treated in the period from 1983 to 1993. In eight patients, the implants had to be removed after an average interval of 5.6 years and they were submitted for histopathological examination. Twenty-five of the 40 patients with silastic implants in place, and five of the 8 patients who had their implants removed, were available for long-term follow-up (mean interval of 7.0 years, SD 2.8 years). Clinical function was rated according to the Helkimo Dysfunction In…
Amorphous hydrogenated carbon (a-C:H) depositions on polyoxymethylene: Substrate influence on the characteristics of the developing coatings
2016
Abstract After oxygen plasma treatment polyoxymethylene (POM) material was exposed to acetylene plasma to progressively deposit two different types of amorphous hydrogenated carbon (a-C:H) films. Radio frequency plasma-enhanced chemical vapor deposition (RF-PECVD) was used to generate both plasma processes. The surface morphology of the coated samples has been investigated by atomic force microscopy (AFM) and their chemical composition by Diffusive Reflectance Infrared Fourier Transform (DRIFT) and Raman spectroscopy. Results revealed the absence of a solid interlayer formation between the a-C:H films and POM. The in sequence exposure of oxygen and acetylene plasma on POM substrate prevents…
Manufacturing, structure and properties of recycled polyethylene terephthalate /liquid crystal polymer/montmorillonite clay nanocomposites
2013
Polyethylene terephthalate (PET)/liquid crystal polymer (LCP)/monthmorillonite clay (MMT) compositions were obtained by melt mixing. Their mechanical, structural, rheological and thermal properties were investigated.
ChemInform Abstract: Chemical Compounds and Toxicological Assessments of Drinking Water Stored in Polyethylene Terephthalate (PET) Bottles: A Source …
2012
A declaration of conformity according to European regulation No. 10/2011 is required to ensure the safety of plastic materials in contact with foodstuffs. This regulation established a positive list of substances that are authorized for use in plastic materials. Some compounds are subject to restrictions and/or specifications according to their toxicological data. Despite this, the analysis of PET reveals some non-intentionally added substances (NIAS) produced by authorized initial reactants and additives. Genotoxic and estrogenic activities in PET-bottled water have been reported. Chemical mixtures in bottled water have been suggested as the source of these toxicological effects. Furthermo…
Morphology, Rheological and Mechanical Properties of Isotropic and Anisotropic PP/rPET/GnP Nanocomposite Samples
2021
The effect of graphene nanoplatelets (GnPs) on the morphology, rheological, and mechanical properties of isotropic and anisotropic polypropylene (PP)/recycled polyethylene terephthalate (rPET)-based nanocomposite are reported. All the samples were prepared by melt mixing. PP/rPET and PP/rPET/GnP isotropic sheets were prepared by compression molding, whereas the anisotropic fibers were spun using a drawing module of a capillary viscometer. The results obtained showed that the viscosity of the blend is reduced by the presence of GnP due to the lubricating effect of the graphene platelets. However, the Cox–Merz rule is not respected. Compared to the PP/rPET blend, the GnP led to a slight incre…
Elasticity and long-term behavior of recycled polyethylene terephthalate (rPET)/montmorillonite (MMT) composites
2014
Abstract Recycled polyethylene terephthalate (rPET) nanocomposites with various amounts of montmorillonite clay (MMT) have been manufactured by using twin screw extrusion. By rising MMT weight content Wf up to 1 wt.% it is possible to increase yield strength and ultimate strength of the composite by 17% and 27% respectively in comparison to neat rPET. Introduction of MMT in the rPET leads also to considerable increase of the modulus of elasticity E. Relationship E(Wf), however, is non-linear and is characterized by slow-down in E growth along with increasing MMT content. At low nanofiller content experimental results are sufficiently well described by using the method of Mori–Tanaka and the…
Reprocessing of polyethyleneterephthalate and characterisation of monopolymer blends of virgin and recycled polymers
1997
Recycling of polyethyleneterephthalate (PET from bottles is considered by changing both reprocessing machines and the effect of humidity. The rheological and mechanical properties of this recycled material remain very close to that of the virgin material provided that a careful drying is carried out before any melt operation. The reprocessing has been carried out mainly in view of the use of this secondary material in blends with virgin PET-monopolymer or homopolymer blends. Indeed, this use is a common industrial practice to reuse plastic scraps. Most monopolymer blends show properties between those of the two components but in some cases lower than those expected on the basis of an additi…